Roba Arduino Uno R3 Clone ATMEGA328P Smd CH340 Open Source Software Development Board

Open Source Software Development Card Microchip

     Uno R3 is one of the open source Arduino platform boards using Microchip's 8-bit Atmega328 MCU. It has 14 digital input/output pins (6 of which are PWM-enabled) and 6 analog input units on the card. These IOs can be accessed externally via the card at the same time as male and female pin headers.

     In addition, there are circuits on the card such as USB UART converter circuit (for programming and communication), 16Mhz crystal, USB socket, power circuit, ICSP connector and reset button. All circuits required for the operation of the microcontroller are ready on the card. It can be easily connected to the computer via USB cable and can be operated with an adapter or battery. It also offers the opportunity to easily prepare software on the open source Arduino IDE.

     Arduino was designed with the aim of easily developing applications for students and electronic enthusiasts who do not know electronics and programming. Arduino cards can read various inputs (such as light sensors, buttons, internet messages). and can create various outputs to the outside (such as burning LEDs, driving a motor, sending messages to the Internet).

     Over the years, Arduino users have created thousands of projects. These range from very simple levels to very complex levels. You can easily learn these projects and use them to develop your own applications. You can also create new applications specific to you.

Arduino advantages

• It is very easy to use Arduino software for beginners. It is flexible enough for advanced users.
  
• It can run on all Mac, Linux and Windows operating systems.
  
• Arduino kits are very cheap and easily accessible.
  
• Arduino Software provides a simple and easy programming environment. Ideal for those who are just starting to learn programming.
  
• With its open source structure, many application examples can be accessed. You can easily develop applications with C++ based libraries. You can also easily add Avr-C codes to your project if you wish.
  
• It is also possible to develop your applications with open source additional development modules, shields and sensor cards. You can easily make your own additional boards and add them to Arduino boards.
  
• Arduino boards contain Atmel company's mcu.
  
• There is no need for a programmer. Both programming and applications can be done on the same card.
  
• It can detect many inputs thanks to its analog and digital inputs.
  
• You can produce outputs to the outside world (such as sound, light, movement, etc.).
  
• It is widely used. In this way, it is possible to find plenty of resources on the internet.
  

• Integrated: ATmega328
  
• CH340 usb to uart converter integrated
  
• Operating voltage:  DC  5V
  
• External input voltage:  DC 6-20V  (Recommended for use with 12V )
  
• Number of digital pins:  14 Pieces  (6 of them are PWM outputs)
  
• Analog input pins:   6 Pieces
  
• I/O current: 40mA ( 50mA 3.3V )
  
• Flash memory:  32KB
  
• Processor speed: 16 MHz
  
• 2.1mm standard female adapter socket.
  
• 5V and 3.3V voltage generating circuits on the board
  
• 4 female expansion sockets
  
• Empty header sockets for all IOS for expansion cards or external circuit connections.
  
• Reset button
  
• 2x3 Pin ISP programming socket
  
• User indicator led.
  
• Power indicator LED.
  
• Uart rx tx indicator leds.
  
• Dimensions:  68.6mm x 53.4mm
  
• Weight:  25gr
  

Driver: CH341SER.EXE file should be downloaded from Google and installed.

Package Included :

•   1 Arduino UNO R3 Clone MEGA328P SMD (CH340)
  
•   1 Piece 40 Pin Male Header